tinyⒶllotment

Growing as much food on as little land for as little money as possible


4 Comments

Dome plot starting to come together.

But still so much to do.

I have started work on the fence going around the dome plot. I decided to carry on the triangle theme to mimic the bottom layer of the geodesic dome structure. I used the same size material. this will have chicken wire stapled to the face of it and then a capping rail will go along the top. I have built the front side and still have three sides to go but they should not take too long as I kinda know what I am doing now.
If you remember, this is what it looked like before.

2016-02-282010-05-23_zpszkymk0ew

And this is what it looks like now

2016-03-132017-25-06_zpsmmlvphpv

I have also started building the beds in the corners of the plots at the dome end. We are going to have a bark chipping path going right around the dome for easy maintenance.

2016-03-20 17.56.18_zpsgnmfrrkc

We have planted another couple of apple trees in what is to become our edible forest garden. This area will be planted with an understory of soft fruits like blueberry and then a herbaceous layer, ground cover and  vines. I would also like to have fungi in this area as well. It doesn’t look like much at the moment but in a couple of years it will be a very productive but low maintenance area.

2016-03-132017-42-58_zps3husoy2m

Inside the dome we have build a temporary staging so we can start sowing seeds and we have progressed slightly with the aquaponics system. We have filled the fish tank with water and so far there are no leaks and I have built and tested a siphon system to drain the grow beds.
The aquaponics system we are building initially will be a simple “flood and drain” system. The pump will be in the fish tank and will constantly pump water up into the grow beds. The plants will not survive long if their roots were constantly immersed in water so you need to drain the beds on a regular basis. Using a simple siphon it is possible to completely drain the beds without having to use any moving parts such as valves etc.
The beds slowly fill up with water until the water level reaches the top of the siphon it starts tricking out of the drain and back into the fish tank but as the flow increases it begins to siphon and drains all the water back into the fish tank. The beds should drain as quickly as possible as this will both draw oxygen down into the grow media and also introduce oxygen to the fish tank.
I was going to build a “bell siphon” as these are the most common but I recently saw a video on youtube that introduced the “U siphon” to me and it was so simple I decided to build one of those instead. Here is the video where I first saw the U siphon.

And here is my first attempt at building one.

I just built it in a bucket for now so I could quickly test it without having to wait for the whole grow bed to fill up each time.
As you can see it works perfectly but it will take a little bit of tweaking matching the siphon to the pump but that will be another day.

More soon

Advertisements