Growing as much food on as little land for as little money as possible


Drone flight over the Geodesic Dome

As I mentioned in a previous post my friend Neil came over a couple of weeks ago with his drone to take some footage of the Geodesic Dome and the surrounding allotments. Here is the footage he shot that day after some editing and some rather pleasent and fitting music was added. Ignore the idiot with the hat!

Great job Neil.

He is going to come over a few times throughout the season to chart our progress with the project.

If you would like a dome like this in your garden or allotment we are now producing them as a kit. Please call Paul on 07796890337 to discuss options.

More soon


Dome plot starting to come together.

But still so much to do.

I have started work on the fence going around the dome plot. I decided to carry on the triangle theme to mimic the bottom layer of the geodesic dome structure. I used the same size material. this will have chicken wire stapled to the face of it and then a capping rail will go along the top. I have built the front side and still have three sides to go but they should not take too long as I kinda know what I am doing now.
If you remember, this is what it looked like before.


And this is what it looks like now


I have also started building the beds in the corners of the plots at the dome end. We are going to have a bark chipping path going right around the dome for easy maintenance.

2016-03-20 17.56.18_zpsgnmfrrkc

We have planted another couple of apple trees in what is to become our edible forest garden. This area will be planted with an understory of soft fruits like blueberry and then a herbaceous layer, ground cover and  vines. I would also like to have fungi in this area as well. It doesn’t look like much at the moment but in a couple of years it will be a very productive but low maintenance area.


Inside the dome we have build a temporary staging so we can start sowing seeds and we have progressed slightly with the aquaponics system. We have filled the fish tank with water and so far there are no leaks and I have built and tested a siphon system to drain the grow beds.
The aquaponics system we are building initially will be a simple “flood and drain” system. The pump will be in the fish tank and will constantly pump water up into the grow beds. The plants will not survive long if their roots were constantly immersed in water so you need to drain the beds on a regular basis. Using a simple siphon it is possible to completely drain the beds without having to use any moving parts such as valves etc.
The beds slowly fill up with water until the water level reaches the top of the siphon it starts tricking out of the drain and back into the fish tank but as the flow increases it begins to siphon and drains all the water back into the fish tank. The beds should drain as quickly as possible as this will both draw oxygen down into the grow media and also introduce oxygen to the fish tank.
I was going to build a “bell siphon” as these are the most common but I recently saw a video on youtube that introduced the “U siphon” to me and it was so simple I decided to build one of those instead. Here is the video where I first saw the U siphon.

And here is my first attempt at building one.

I just built it in a bucket for now so I could quickly test it without having to wait for the whole grow bed to fill up each time.
As you can see it works perfectly but it will take a little bit of tweaking matching the siphon to the pump but that will be another day.

More soon


Started work on the Dome plot

After the flurry of activity last year to get the Dome built not much else happened on that plot because of the pressures of work and the weather and laziness. Now the weather is easing up a little it is time to start work getting the Dome plot productive.
There is a long list of things that need to be done but the main things are to get the perimeter fence built to keep out rabbits, level the ground inside and outside of the Dome, build the Aquaponics system, build the straw bail hotbeds in the Dome and insulate the northern side of the Dome.

Last weekend I started work on the Aquaponics system. We were given an IBC container but it is not ideal. I has a hole where we don’t need a hole and it used to contain styrene. It has been used for water storage for a long time so all traces of styrene have probably gone by now but I do not want to take any chances so I am going to line the IBC with a pond liner. I am building a simple IBC Aquaponics system for now but because I want to expand this later on into what’s called a CHIFT PIST system I have decided to bury the IBC in the ground. The topsoil at the allotment is quite shallow and then you get down to hard packed shale with lumps of granite so it was hard going to dig down the 700mm or so. The IBC is about a meter tall but I will be cutting the top off to form one of the grow beds plus I can remove the pallet from the bottom so I only have to go down the 700mm. I am undecided whether or not I need to insulate the fish tank from the earth or not. I think I probably will but we will see.

An IBC Aquaponics system is very simple and easy to build. It consists of a fish tank made from the bottom 800mm of an IBC container and a growbed from the top of the container flipped over. The water from the fish tank is continuously pumped up into the growbed at a steady rate which fills the bed up until it reaches the top of a siphoning stand pipe. The the water empties back into the fish tank and the whole cycle starts again. The growbed is filled with a growing medium like gravel or expanded clay pebbles and this is what your plants grow in. The growbed also has an overflow back into the fish tank just in case the siphon stops working and prevents the fish tank from being emptied which would be catastrophic for you fish. You can have problems with this system though because when the growbed or growbeds ar full there is little water in the fish tank and under certain circumstances the fish could get stressed due to lack of water. This is where the CHIFT PIST system comes in.

CHIFT PIST stands for Constant Height In Fish Tank, Pump In Sum Tank. The pump pumps the water from the sump tank into the growbeds which drain into the fish Tank which in turn overflows back into the sump tank. At all stages of the cycle the fish Tank is full so the fish never get stressed due to lack of water. Even if a pipe failed and all the water got pumped out of the sump tank the fish Tank would remain full. So this is why I am going to all the trouble of burying the IBC now. The aquaponics will be an ongoing project over the next few months but I needed to get the hole dug first. Here is the tank in the ground.


All the earth removed from the hole is going to be used to level and slightly raise the floor of the dome. We will then put down a layer of weed suppressant membrane and then cover with wood chips just so we have a  tidy looking interior to the dome.



The next thing to go into the dome will be the straw bail hotbed. This will consist of a raised bed constructed out of 6 straw bails. The bed will be filled with fresh manure with a top dressing of compost. This will heat up and help heat the dome and will be a nice place to put our seed trays to help germination. In the summer we will plant melon and squash etc. Next winter we can then dig out the well rotted manure to use outside in the beds and replace it with fresh manure again to keep the dome heated over the winter. This is the plan anyway. As with everything I do in the garden it is a bit of an experiment.

We have done nothing to the outside area of the dome plot so that is also going to be addressed over the next few weeks. We are going to rip out the old fence and rotten posts and set scaffold boards on edge all around the perimeter. We will then build  a framework of 2 by 1 timber with wire mesh attached to keep out the rabbits. The scaffold boards will serve a couple functions. One it will stop the wire mesh from tangling with the strimmers when they cut the grass between the plots and two it will mean we can fill the plot with manure and other organic matter making a large raised bed.

So we will be progress as we find the materials. We have the the weed suppressant membrane as a local company kindly donated a massive amount of sizeable offcuts. Certainly enough to do the whole dome floor. I need need about 7 scaffold boards to do the perimeter of the plot and I have 4 so far so that should not be a problem. I am still trying to find some straw bails and a supply of fresh manure but we will get there.

more soon



1 Comment

Triangles, Triangles and more Triangles

The dome is progressing nicely now although it is still slow going because I have to fit it in around work and  the weather. One of the problems has been that I have nowhere I can permanently set up my table saw and my chop saws so I have to get them out in the yard, set them up, them clean up and put them away every time I want to cut something. On the next dome I will cut all of the timber to do a whole dome to length on one day, mill the angles on one day and then put the angles on the one end of the struts in one day so I get all the machining out of the way early on. It is then easy to make up triangles whenever you have a spare moment or just devote a day to triangle making.

I now only have 34 more triangles to make and once I am set up I can make a triangle in about two and a half minutes so it doesn’t take long once you get going.

All of the timber for the remaining triangles has been cut and milled ready to go so I will get all the triangles finished this week

Wood cut and milled for the remaining triangles


They are in two piles as there are two different angles in each triangle so you end up with two stuts with one angle and one strut with another angle per triangle. It is not a problem unless you mix the two piles up.

Here is the triangles I have constructed so far. There are basically two types of triangle in the dome. One type makes hexagons and the other pentagons. All the pentagon triangles are made so just a few more hexagon triangles and that will be it.

Triangles so far

I will be ordering the plastic today so hopefully we will begin covering the panels next week but it all depends on the weather.

More soon



Patrick Whitefield 1949 – 2015

It is with great sadness that I tell you that Patrick Whitefield the father of Permaculture in the UK passed away today. He was an inspiration to a generation of permaculture followers both here in the UK and beyond. When I first became interested in Permaculture it was his books I turned to. Permaculture in a nutshell was my introduction to the subject and later I started borrowing The Earth Care Manual from the library until I could afford to buy a copy of my own. My Wife gave me a copy this Christmas and it will be one of those books that will stay with me for the rest of my life.

I started studying with Patrick and his associates late last year but I never got to meet the great man himself. Despite that I still feel a great loss and I am very sad that I will never get to meet him.

My thought go out to his family at this time.

Leave a comment

February 2015 Update

Not a lot happening at the moment. I have planted out the rest of my overwintering onions but apart from that we have been doing more work for the allotment site itself than our particular plot.

Earlier in the month the Allotment Association organised a working party to improve the allotment site for all of it’s users. The diveway up to the site used to be a very wet and bumpy drive until the Allotment Association raised the funds and resurfaced the drive with hardcore. From time to time it is necessary to re dress the surface and fill in any pot holes and that is now done. The other major job was to install two more water stations so people don’t have to carry watering cans so far to get water. Everyone pulled together to get the job done. It just now needs to be connected up.

The owner of the allotment site has given a large plot to the association to use as a Community Plot. Work as also started on this to turn it into a space that can be used by all association members. Steve is in charge of organising the plot and things have already started happening. There is an overgrown pond on the plot which has now been cleared. There is a lots of frogs and spawn in the pond and I have transferred a small amount of spawn to my own pond so hopefully we will have frogs on the plot  to keep the slugs down. Another thing which is really exciting about the community plot is we are going to plant a orchard of Cornish apples. Each tree will be donated by interested people and can be dedicated to someone. I am going to donate a tree dedicated to my wife’s father Roy who passed away last year. If anyone reading this would like to donate a tree they will cost £15. Just comment on this post if you would like to dedicate a tree to a loved one.